Tensile Tester horizontal

Standarde:
ISO 1924-1, -2, -3
Scan P38, P67
TAPPI T494, T456
PAPTAC D34
EN 12625–4, -5
DIN 53112/1, DIN EN ISO 12625–4 and 5
APPITA/AS 1301.448

    Features
  • Suitable for paper, board and tissue
  • Wet and dry tensile tests are possible
  • Automatic sample detection
  • Pneumatic sample clamp with flat faced jaws (according to standard)
  • Automatic return of clamp after the test
  • No slack of samples due to sample support
Tester-intindere-orizontal
  • Test can be started manually if necessary (for transparent samples)
  • Touchscreen operation
  • MD and CD measurements, ratio calculation
  • Display of results according to the selected standard; statistic functions and MD/CD
  • Printer interface for selected HP printers
  • Compatible to MiniStat and Probenet

Description
The horizontal Tensile Tester, model FRANK-PTI, has been developed especially for the paper industry. Designed to provide easy operation and precise measurement. Colour touchscreen displays values and graphs. Test methods are selectable from the main menu. The instrument measures according to relevant standards. Changing from MD to CD simply by one keystroke gives ratio calculations. A printer can be connected and prints single values as well as graphs and statistic. .

Test description
You can select a test program (e.g. wet tensile test according to EN 12625-5) with pre-selected parameters. The specimen is given an identification number. Before wet testing, check and if necessary fill the water inlet. The operator inserts the sample. The clamps detect the sample and close. They move towards each other and immerse the sample (depending on the preset time). After immersion time, the tensile process starts. The sample is tensioned until it breaks.

Other programs (e.g. EN 12625-4, or ISO 1924-1, -2, or -3) immediately tension the sample. The touchscreen displays graphs and single values. The clamps return to their initial position and a new sample can be inserted and tested. By changing from MD to CD values are allocated and stored separately. The single curves can be viewed on the touchscreen. The statistics display gives the single values as well as the MD/CD ratio. Values and graphs can be printed or transferred to a PC.

The clamps have been specially designed for paper testing. The clamps correspond exactly to the appropriate standards. The FRANK-PTI Tensile Tester also allows measurement according to the withdrawn standard 1924-1. Some clients had tested with 180 mm samples for decades. These samples can be still tested on our horizontal tensile tester.

Specifications:

  • Sample widths 15, 25, 25,4, or 50 mm
  • Standard sample lengths: 100 or 180 mm
  • Preset testing programs: ISO 1924-2 and -3 , and inv. ISO 1924-1
  • Force sensors: 100, 200, or 500 N
  • Connection for printer
  • Pneumatic sample clamping – clamping force adjustable from 100-1200 N
  • Maximum sample stroke: 300 mm
  • Test speed adjustable from 1-400 mm/min•
  • Accuracy: max. 1 % in the range of 1-100 % of the nominal load
  • Display of: tensile strength (kN/m), breaking length (km), tensile index (Nm/g), test time (s), breaking elongation (mm), relative elongation (%), breaking force (N), tensile energy absorption (TEA – J/qm), TEA index (mJ/g), tensile rigidity, tensile index, Young’s modulus RS 232 interface for result transmission User defined programs possible

Technical Data:
Electricity: 110–230 V, 50–60 Hz
Water supply: None
Compressed air: 400–600 kPa
Dimensions (WxDxH): 60x52x24 cm
Net weight: 38 kg
Gross weight: 44 kg

detalii tehnice